[Check_mk (english)] WLC 2106 Controller Not Showing cisco_wlc

Jesse Shumaker jshumaker at crexendo.com
Sun Oct 19 01:42:28 CEST 2014


-sh-4.1$ snmpwalk -v2c -On -c public 10.3.12.16 | grep 1.3.6.1.2.1.1.2.0

.1.3.6.1.2.1.1.2.0 = OID: .1.3.6.1.4.1.9.1.828

At the moment the check only knows devices with .1.3.6.1.4.1.9.1.1069 or .1.3.6.1.4.1.14179.1.1.4.3 that as content.

-sh-4.1$ snmpwalk -v2c -On -c public 10.3.12.16 | grep .1.3.6.1.4.1.9.1.1069
-sh-4.1$ snmpwalk -v2c -On -c public 10.3.12.16 | grep .1.3.6.1.4.1.14179.1.1.4.3
-sh-4.1$ snmpwalk -v2c -On -c public 10.3.12.16 | grep 1.3.6.1.4.1.14179.1.1.4.3
-sh-4.1$ snmpwalk -v2c -On -c public 10.3.12.16 | grep 1.3.6.1.4.1.9.1.1069

nothing from those though. There are a ton of other OIDs if I do just a straight

-sh-4.1$ snmpwalk -v2c -On -c public 10.3.12.16

Can I add some of these as custom checks on my 2106 WLC?

________________________________
From: Andreas Döhler [andreas.doehler at gmail.com]
Sent: Saturday, October 18, 2014 9:26 AM
To: Jesse Shumaker
Cc: checkmk-en at lists.mathias-kettner.de
Subject: Re: [Check_mk (english)] WLC 2106 Controller Not Showing cisco_wlc

Can you post the content of this .1.3.6.1.2.1.1.2.0 OID?
At the moment the check only knows devices with .1.3.6.1.4.1.9.1.1069 or .1.3.6.1.4.1.14179.1.1.4.3 that as content.

br
Andreas

2014-10-18 1:29 GMT+02:00 Jesse Shumaker <jshumaker at crexendo.com<mailto:jshumaker at crexendo.com>>:
I have added my wlc 2106 device host and it's showing it can ping it allong with these detected checks:

("crexwifi", "if64", '10/100 Copper - Level 0x50e0001 1', {'state': ['1'], 'speed': 100000000}),
  ("crexwifi", "if64", '10/100 Copper - Level 0x50e0001 2', {'state': ['1'], 'speed': 100000000}),
  ("crexwifi", "if64", '10/100 Copper - Level 0x50e0001 7', {'state': ['1'], 'speed': 100000000}),
  ("crexwifi", "if64", '10/100 Copper - Level 0x50e0001 8', {'state': ['1'], 'speed': 100000000}),
  ("crexwifi", "if64", 'Virtual Interface', {'state': ['1'], 'speed': 100000000}),
  ("crexwifi", "snmp_info", None, None),
  ("crexwifi", "snmp_uptime", None, {}),
]

if64              5 new checks
snmp_info         1 new checks
snmp_uptime       1 new checks


but it won't utilize the cisco_wlc check (https://mathias-kettner.de/checkmk_check_cisco_wlc.html). Anyone know why this is?

thanks
_______________________________________________
checkmk-en mailing list
checkmk-en at lists.mathias-kettner.de<mailto:checkmk-en at lists.mathias-kettner.de>
http://lists.mathias-kettner.de/mailman/listinfo/checkmk-en



More information about the checkmk-en mailing list